SØG - mellem flere end 8 millioner bøger:
Viser: EMC for Product Designers
EMC for Product Designers Vital Source e-bog
Tim Williams
(2016)
EMC for Product Designers
Tim Williams
(2016)
Sprog: Engelsk
Detaljer om varen
- 5. Udgave
- Vital Source searchable e-book (Reflowable pages)
- Udgiver: Elsevier Science (Oktober 2016)
- ISBN: 9780081010143
EMC for Product Designers, Fifth Edition, provides all the key information needed to meet the requirements of the EMC compliance standards. More importantly, it shows how to incorporate EMC principles into the product design process, avoiding cost and performance penalties to meet the needs of specific standards that produce a better overall product. As well as covering the 2016 versions of the EU EMC and Radio Directives, this new edition has been thoroughly updated to be in line with the latest best practices in EMC compliance and product design. Coverage now includes extra detail on the main automotive, military, and aerospace standards requirements, as well as a discussion of the issues raised by COTS equipment in military applications.
New to this edition are chapters on functional safety, design and installation aspects of switchmode power converters with an introduction to EMC testing of integrated circuits, new details on CISPR 32/35, updates to new versions of the Directives DEF STAN 59-411, DO-160 and MIL STD 461, with more commentary on the implications and requirements of military and aerospace standards, and an added reference to CE Marking for military and problems of COTS.
In addition, new sections on IC emissions measurements per IEC 61967 are included, along with new coverage of FFT/time domain receivers, an expanded section on military/aerospace transients, special references to DO160 lightning, added material on MIL STD 461 CE101, RE101, and RS101, the latest practice in PCB layout with a discussion of slots in ground planes, current practice on decoupling, extended coverage of DC-DC converters and motor drives, and a new section on switching inverter (motor drives, renewable energy converters, etc.) installation, and the latest 2016 mandatory regulations of the RTTE and EMC Directives.
- Presents a complete introduction to EMC for product design from a practicing consultant in the field
- Includes short case studies that demonstrate how EMC product design is put into practice
- Provides the latest 2016 mandatory regulations of both the RTTE Directive and EMC Directive
Bookshelf online: 5 år fra købsdato.
Bookshelf appen: ubegrænset dage fra købsdato.
Udgiveren oplyser at følgende begrænsninger er gældende for dette produkt:
Print: -1 sider kan printes ad gangen
Copy: højest -1 sider i alt kan kopieres (copy/paste)
Detaljer om varen
- 5. Udgave
- Paperback: 564 sider
- Udgiver: Elsevier Science & Technology (September 2016)
- ISBN: 9780081010167
EMC for Product Designers, Fifth Edition, provides all the key information needed to meet the requirements of the EMC compliance standards. More importantly, it shows how to incorporate EMC principles into the product design process, avoiding cost and performance penalties to meet the needs of specific standards that produce a better overall product. As well as covering the 2016 versions of the EU EMC and Radio Directives, this new edition has been thoroughly updated to be in line with the latest best practices in EMC compliance and product design. Coverage now includes extra detail on the main automotive, military, and aerospace standards requirements, as well as a discussion of the issues raised by COTS equipment in military applications.
New to this edition are chapters on functional safety, design and installation aspects of switchmode power converters with an introduction to EMC testing of integrated circuits, new details on CISPR 32/35, updates to new versions of the Directives DEF STAN 59-411, DO-160 and MIL STD 461, with more commentary on the implications and requirements of military and aerospace standards, and an added reference to CE Marking for military and problems of COTS.
In addition, new sections on IC emissions measurements per IEC 61967 are included, along with new coverage of FFT/time domain receivers, an expanded section on military/aerospace transients, special references to DO160 lightning, added material on MIL STD 461 CE101, RE101, and RS101, the latest practice in PCB layout with a discussion of slots in ground planes, current practice on decoupling, extended coverage of DC-DC converters and motor drives, and a new section on switching inverter (motor drives, renewable energy converters, etc.) installation, and the latest 2016 mandatory regulations of the RTTE and EMC Directives.
Part 1: Legislation and Standards
1. Introduction
2. The EMC and Radio Directives
3. International EMC compliance requirements
4. Commercial standards
5. Other standards and legislation
6. EMC and Functional Safety
Part 2: Testing
7. RF emissions measurements
8. Immunity tests
9. Low frequency tests
10. Test planning
Part 3: Design
11. Interference coupling mechanisms
12. Layout and grounding
13. Digital and analogue circuit design
14. Interfaces and filtering
15. Shielding
16. Systems EMC
17. EMC management
Andre har også købt:
Af Peter Wilson
Handler du som firma
Forretningsbetingelser
Porto og forsendelse
Data & cookiepolitik
Tlf 77 42 43 44 - email poly@polyteknisk.dk - CVR 34072655 - Sydbank Reg: 6748 Konto 0001107927